Pre-painted aluminium sheet S.Con
Architectural aluminium with factory polymer coating for facades, roofing and interior solutions.
S.Con — aluminium rolled product with decorative-protective coating applied using continuous coil coating technology. The coating is applied to the metal strip in factory conditions — before cutting and forming the material.
For S.Con, coatings with varying atmospheric resistance are available — PVDF, HD PE and PE, as well as a wide palette of colors, metallics and decorative effects. The material can be cut, bent and formed into facade cassettes, linear panels, standing seam elements and complex geometry details.
The face surface of the sheet is protected with a PVC film 50–100 microns thick — it protects the coating from scratches and mechanical damage throughout the entire path from production to finished product: during transportation, storage, laser cutting and bending. The reverse side is additionally protected with technical varnish 5–7 microns thick.
PVDF — fluoropolymer coating based on polyvinylidene fluoride (minimum 70% PVDF resin, Kynar 500® / Hylar 5000® standard) with acrylic copolymer. Two- or three-layer system with total thickness up to 45 microns.
The C–F bond in the PVDF molecule is one of the most stable in organic chemistry. This is what ensures what matters for a facade in 10, 15 and 25 years: color does not fade, surface does not chalk, coating maintains adhesion when exposed to acids, salt fogs and aggressive atmosphere. Compliance with QUALICOAT Class 3 and GSB Premium — confirmation by independent certification, not a declaration.
Recommended for ventilated facades, roofing and projects in coastal, industrial and harsh climatic zones — everywhere where the material requires not just appearance, but guaranteed durability.
PE — polyester coating based on thermosetting resin, cured at high temperature. Application thickness — from 25 microns. Provides stable adhesion, flexibility during forming and impact resistance sufficient for processing and installation.
Optimal where aesthetics of space is the priority, not atmospheric load: interior systems, ceilings, partitions, finishing of public and commercial facilities. The lowest cost in the S.Con line while fully maintaining processing capability.
Due to limited UV resistance and atmospheric durability, PE application on open facades and roofing is not recommended.
Non-standard formats and coatings — by arrangement with the manager.
Coil-coated pre-painted aluminium rolled product S.Con is used where both architectural expressiveness and structural durability are important: in rainscreen ventilated facades, lightweight roofing systems and interior solutions with exposed metal.
For architects, this is the opportunity to work with large planes and complex geometry without compromising surface quality; for developers, it's a way to enhance the value of a project through durable cladding material; and for contractors, it's convenient to install and predictable in behavior metal, equally reliable on facades, roofs and in interiors.
Ventilated facades — cassettes, linear panels, custom shapes for the project
Roofing — standing seam, cassette and flat systems, water gutters and flashings
Interior — ceiling systems, partitions, decorate elements in public spaces
Why pre-painted aluminium is the ideal material for roofing and facades
Aluminium with polymer coating combines the lightness of metal and the protective properties of modern paints. It is not afraid of corrosion, ultraviolet light and temperature fluctuations.
Lightness and strength
Aluminium is three times lighter than steel. This reduces the load on load-bearing structures and simplifies installation. At the same time, it is strong enough to withstand wind and snow loads.
Corrosion resistance
Aluminium itself does not rust, and the polymer coating creates an additional barrier against aggressive environment (acid rain, sea salt, industrial emissions).
Flexibility of color solutions
Pre-painted aluminium is available in any color according to the RAL catalog. Matte, glossy, metallics, textures that look like wood or stone — the choice is limited only by the architect's imagination.
Durability
The service life of quality pre-painted aluminium sheet is from 20 to 40 years depending on the type of coating. During this time, the color does not fade, and the coating does not crack or peel.
What types of coatings exist and how they differ
Three main types of polymer coatings are used to paint aluminium sheets. Each has its own characteristics and application area.
Polyester (PE)
Polyester is a classic glossy coating based on polyester resin. Layer thickness — 20–25 microns.
Advantages:
-
Low price (most affordable option).
-
Good color stability.
-
Elasticity — suitable for bending and profiling.
Disadvantages:
-
Sensitive to scratches.
-
Less resistant to aggressive environment (industrial zones, seaside).
Where it is used:
-
Roofing and facades of private houses.
-
Interior finishing.
-
Elements without high wear resistance requirements.
Super-polyester (HD PE)
Super-polyester is an improved version of polyester with additives that increase strength and UV resistance. Layer thickness — 25–35 microns.
Advantages:
-
Higher scratch resistance than PE.
-
Resistance to fading.
-
Good price-to-quality ratio.
Disadvantages:
-
Moderate resistance to chemical exposure.
Where it is used:
-
Roofing and facades of commercial and residential buildings.
-
Industrial facilities with moderate loads.
-
Outdoor advertising elements.
PVDF (polyvinylidene fluoride)
PVDF is a coating based on polyvinylidene fluoride. Layer thickness — 25–40 microns. This is the most expensive and most reliable option.
Advantages:
-
Maximum UV resistance (does not fade for decades).
-
High resistance to scratches and chemical exposure.
-
Maintains gloss and color even in aggressive environment (industrial zones, seaside).
Disadvantages:
-
High price.
-
Less elastic (requires care during bending).
Where it is used:
-
Facades of high-rise buildings and business centers.
-
Facilities in aggressive environment (chemical plants, ports).
-
Roofing and facades of premium segment.
Comparison of coating types
| Characteristic | Polyester (PE) | Super-polyester (HD PE) | PVDF (polyvinylidene fluoride) |
|---|---|---|---|
| Layer thickness | 20–25 microns | 25–35 microns | 25–40 microns |
| UV resistance | Moderate | High | Maximum |
| Scratch resistance | Low | Moderate | High |
| Chemical resistance | Low | Moderate | High |
| Elasticity | High | Moderate | Low |
| Price | Low | Moderate | High |
| Service life | 10–15 years | 15–25 years | 25–40 years |
Where pre-painted aluminium sheets are used
Roofing
Aluminium sheets are used for standing seam roofing. Due to the lightness of the material, large spans can be covered without reinforcing the rafter system.
Suitable for: pitched roofs, domes, arches, awnings.
Ventilated facades
Pre-painted aluminium is one of the most popular materials for rainscreen ventilated facades (RVF). Sheets are mounted on a substructure vertically, horizontally or diagonally.
Suitable for: office centers, shopping centers, residential buildings.
Decorative elements
Aluminium sheets are used to make flashings, cornices, moldings, canopies, downspouts. These details can be painted to match the facade or made as contrasting elements.
Suitable for: any buildings where detailing matters.
Industrial facilities
Hangars, warehouses, production shops — anywhere reliable and affordable roofing or cladding is needed. For such facilities, polyester (PE) is most often chosen as the most budget-friendly option.
Why it is profitable to buy pre-painted aluminium sheets from a manufacturer
If you decide to buy pre-painted aluminium sheets PVDF, Super-polyester (HD PE), Polyester (PE) for roofing and facade cladding of buildings, working directly with the manufacturer — Cladding Solutions provides several important advantages.
Prices from the manufacturer
Without intermediaries — without markups. Purchasing from a manufacturer costs 15–30% less than in retail networks. This is especially noticeable with large volumes.
Quality control
The manufacturer is responsible for each stage: from the selection of aluminium raw materials to the application of coating. You receive sheets of accurate geometry, without painting defects.
Any thickness and size
Unlike warehouses that sell sheets of standard sizes, the manufacturer can cut the material for your project. This minimizes waste and saves budget.
Delivery throughout Russia
The manufacturer ships products to any region of Russia through verified transport companies. Delivery to a Moscow terminal is often free.
Technical support
The manufacturer will advise on thickness selection, coating type, installation method. If necessary, it will provide recommendations for maintenance.
How to choose a coating type for your project
| Operating conditions | Recommended coating |
|---|---|
| Private house far from industrial zones | Polyester (PE) |
| Commercial building in the city | Super-polyester (HD PE) |
| High-rise building facade (over 50 m) | PVDF (polyvinylidene fluoride) |
| Project on the seaside | PVDF (polyvinylidene fluoride) |
| Industrial building (chemical production) | PVDF (polyvinylidene fluoride) |
| Roofing with high color stability requirements | Super-polyester (HD PE) |
| Budget facility (hangar, warehouse) | Polyester (PE) |
Frequently asked questions
1. How is polyester different from super-polyester?
Super-polyester has a thicker and stronger coating (25–35 microns vs. 20–25 microns). It better resists scratches and fading, but costs more.
2. Why is PVDF the most expensive?
PVDF contains polyvinylidene fluoride — a component that provides maximum resistance to ultraviolet light, chemicals and mechanical damage. It does not fade even after 30 years.
3. Can pre-painted aluminium be bent?
Yes, but with care. Polyester (PE) is the most elastic — suitable for bending at 90° and more. PVDF is less elastic — sharp bends can crack the coating.
4. How to care for a pre-painted aluminium facade?
Natural rain is enough. For heavy soiling, you can wash with a soft cloth and soapy water. Do not use abrasives, acids and solvents.
5. What color to choose: matte or glossy?
Glossy looks more impressive, but streaks and fingerprints are visible. Matte surface is more practical — minor scratches and dust are less noticeable. For high-rise facades, matte PVDF is often chosen.
Conclusion
Pre-painted aluminium sheets are a universal material for roofing and facades. The correct choice of coating (PE, HD PE or PVDF) depends on budget, operating conditions and durability requirements. Polyester is suitable for private houses and budget facilities, super-polyester — for commercial construction, and PVDF — for premium projects and aggressive environments.
If you want to buy pre-painted aluminium sheets PVDF, Super-polyester (HD PE), Polyester (PE) for roofing and facade cladding of buildings, contact the manufacturer directly — Cladding Solutions. You will receive quality material with warranty, precise sizes, honest pricing and delivery throughout Russia. Make your project reliable and beautiful for decades.